Standard hydraulic cylinders
Watz standard cylinders
ZD 160 bar
Round cylinder
- Robust screwed construction
- Compact design
- Good price-performance ratio
- Broad range of applications
- 7 types of attachment
- 3 seal variants
Optional equipping with:
Synchronous operation function
Position measuring system
Rated pressure: 160 bar
Piston diameter: from 20 to 125 mm
Piston rod diameter: from 14 to 90 mm
Max. stroke length: up to 3,000 mm
Max. compressive force: 196.4 kN
Max. pulling force: 134.7 kN
Hydraulic fluid: Mineral oil to DIN 51524 HL, HLP
Mounting orientation: Any
Stroke speed: Standard 0.5 m/s (dependent on the connected load)
ZM 250 bar
Round cylinder
- Robust screwed construction
- Compact design
- Good price-performance ratio
- Broad range of applications
- 12 types of attachment
- 3 seal variants
Optional equipping with:
Synchronous operation function
Position measuring system
Rated pressure: 250 bar
Piston diameter: from 32 to 180 mm
Piston rod diameter: from 18 to 125 mm
Max. stroke length: up to 3,000 mm
Max. compressive force: 636.3 kN
Max. pulling force: 398.5 kN
Hydraulic fluid: Mineralöl nach DIN 51524 HL, HLP
Hydraulic fluid temperature range: -20 to +80 °C
Mounting orientation: Any
Stroke speed: Standard 0.5 m/s (dependent on the connected load)
ZE 300 bar
Round cylinder
- Single-acting hydraulic cylinders
- Robust screwed construction
- Compact design
- Good price-performance ratio
- Broad range of applications
- 8 types of attachment
Optional equipping with:
- Synchronous operation function
- Position measuring system
Rated pressure: 200 bar
Piston rod diameter: Plunger from 30 to 100 mm
Max. stroke length: up to 3,000 mm
Max. compressive force: 235.6 kN
Hydraulic fluid: Mineral oil to DIN 51524 HL, HLP
Hydraulic fluid temperature range: -20 to +80 °C
Einbaulage: Any
Stroke speed: Standard 0.5 m/s (dependent on the connected load)
ZB 500 bar
Block cylinders
- Compact block design
- Double or single-acting block cylinders, with and without spring return
- Good price-performance ratio
- 3 types of attachment
Optional equipping with:
- Synchronous operation function
- Position measuring system
Rated pressure: 500 bar
Piston diameter: from 16 to 200 mm
Piston rod diameter: from 10 to 125 mm
Max. stroke length: up to 250 mm
Max. compressive force: 1570 kN
Max. pulling force: 957 kN
Hydraulic fluid: Mineral oil to DIN 51524 HL, HLP
Druckflüssigkeitstemperaturbereich: -20 to +80 °C
Mounting orientation: Any
Stroke speed: Standard 0.5 m/s (dependent on the connected load)
DR 700 bar
Pressure intensifiers
- Amplification ratios 1:5, 1:10, 1:20
- Volumes from 0.05 to 1.0 litre
- Shut-off valve (only pneumatic/ hydraulic)
Optional equipping with:
- Forming cylinder
- Workpiece downholder
- Position measuring system
- Pressure transducer
Pneumatic/hydraulic amplification ratio: 1:5
Primary pressure: 140 bar
Secondary pressure: 700 bar
Hydraulic fluid: Mineral oils to DIN 51524 HL, HLP
Hydraulic fluid temperature: -20 to +80 °C
Standard ISO cylinders
ZI 160 bar
Tie-rod cylinder - ISO 6020/2
- Tie rod construction
- Easy replaceability of the cylinder due to normed DIN standard sizes
- 13 types of attachment
- 2 seal variants
Rated pressure: 160 bar
Piston diameter: from 25 to 200 mm
Piston rod diameter: from 12 to 140 mm
Max. stroke length: 3,000 mm
Max. compressive force: 785.6 kN
Max. pulling force: 400.4 kN
Hydraulic fluid: Mineral oil to DIN 51524 HL, HLP
Hydraulic fluid temperature range: -20 to +80 °C
Mounting orientation: Any
Stroke speed: Standard 0.5 m/s (dependent on the connected load)
ZN_RX 250 bar
Round cylinder - ISO 6022
- Flexible, robust flanged construction
- Uncomplicated dismantling and replaceability of all wearing parts
- Uncomplicated replaceability of the cylinder due to standard factory sizes available worldwide.
- 6 types of attachment
- 3 seal variants
Optional equipping with:
- Synchronous operation function
- Position measuring system
Rated pressure: 250 bar
Piston diameter: from 50 to 200 mm
Piston rod diameter: from 32 to 140 mm
Max. stroke length: 3,000 mm
Max. compressive force: 7852 kN
Max. pulling force: 440.3 kN
Hydraulic fluid: Mineral oil to DIN 51524 HL, HLP, water glycol HFC
Hydraulic fluid temperature range: -20 to +120 °C
Mounting orientation: Any
Stroke speed: Standard 0.5 m/s (dependent on the connected load)
ZL_RX 250 bar
Round cylinder
- Flexible, robust flanged construction
- Uncomplicated dismantling and replaceability of all wearing parts
- Uncomplicated replaceability of the cylinder due to standard factory sizes available worldwide.
- 6 types of attachment
- 3 seal variants
Optional equipping with:
- Synchronous operation function
- Position measuring system
Rated pressure: 250 bar
Piston diameter: from 40 to 320 mm
Piston rod diameter: from 22 to 220 mm
Max. stroke length: 3,000 mm
Max. compressive force: 2010.2 kN
Max. pulling force: 1225.2 kN
Hydraulic fluid: Mineral oil to DIN 51524 HL, HLP, water glycol HFC
Hydraulic fluid temperature range: -20 to +120 °C
Mounting orientation: Any
Stroke speed: Standard 0.5 m/s (dependent on the connected load)
ZH_RX 350 bar
Round cylinder
- Flexible, robust flanged construction
- Uncomplicated dismantling and replaceability of all wearing parts
- Uncomplicated replaceability of the cylinder due to standard factory sizes available worldwide.
- 5 types of attachment
- 3 seal variants
Optional equipping with:
- Synchronous operation function
- Position measuring system
Rated pressure: 350 bar
Piston diameter: from 40 to 200 mm
Piston rod diameter: from 28 to 140 mm
Max. stroke length: 3,000 mm
Max. compressive force: 1099.6 kN
Max. pulling force: 560.7 kN
Hydraulic fluid: Mineral oil to DIN 51524 HL, HLP, water glycol HFC
Hydraulic fluid temperature range: -20 to +120 °C
Mounting orientation: Any
Stroke speed: Standard 0.5 m/s (dependent on the connected load)
